Published at Thursday, April 25th, 2019 - 00:35:13 AM. Curtains. By Lacina Fabre.
If you are using curtain wire go to the top of the window frame and attach one screw eye on the left and right hand side of the frame. Ready made organza curtains should have tabs at the top, attach hooks to both ends of the curtain wire and then thread the wire through the tabs of both curtains and attach the wire to the screw eyes on the window frame. If you are using a wooden dowel use cup hooks and not screw eyes for the dowel to rest on. Thread the dowel through the tabs and place on cup hooks.
NB It is important that you get the sequence 100% correct before you make the marks and the holes, should you realize that you want to change the roses around after the holes have been made you run the risk of having gaping holes in your curtain which could look rather messy. The next step will be to measure the top width of the window frame and then cut the dowel or curtain wire in order to fit (using either a pliers if it is wire or a hand saw if you are cutting the dowel).
Any content, trademark’s, or other material that might be found on the Mipente website that is not Mipente’s property remains the copyright of its respective owner/s. In no way does Mipente claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.